Monday, January 26, 2009

FX Ultimate

This one shot CPL's at 550 FPS to 750 FPS intermittently. The pellets were clipping the shroud because the nose cone came loose. 3 washers on the striker spring got it to 29 FPE.
I clipped the foregrip over the air tube rather than screwing it down and then screwing the tube in.
This cracked the aged plastic foregrip and you cannot buy them so I had to glue it.
I installed 3 washers and sent the new owner these pics with instructions so he could
use the 4th (or fewer) if he chose to.

No comments: